RD Manufacturing have created a system to sleeve piles for jetty's and piers. The elements are harsh as we know, wood rots, steel rusts and concrete corrodes quickly when exposed to sea water, fresh water or even just the elements in the average marine atmosphere.
To prevent this, encase the wood, steel or concrete piling within a thin wall (or thick wall) poly pile sleeves, which are made from HDPE pipe. Quick to install, economical and long lasting, poly pile sleeves are the ideal way to increase the life of your marine assets.
When choosing the size of the poly pipe pile sleeves, you need to consider the outside diameter of the pile you are encasing, and the internal diameter of the poly sleeves. The greater the difference between these two measurements, the more grout is required, which is a costly and lengthy process. We recommend you choose a sleeve with an internal diameter as close to, but slightly bigger than, the pile you are encasing.
We can assist companies in the selection process of their marine pile protection, including sizing, costing, site requirements and cost reduction.
Proudly made in New Zealand by RD Manufacturing
ENQUIRE
| PILING SLEEVES | |||
|---|---|---|---|
| DN (OD) mm | Product Code | Nominal Length m | Weight per Length kg |
| 315 | PS315.08 | 8 | 76 |
| PS315.10 | 10 | 95 | |
| PS315.12 | 12 | 114 | |
| 355 | PS355.08 | 8 | 94 |
| PS355.10 | 10 | 118 | |
| PS355.12 | 12 | 142 | |
| 375 | PS375.08 | 8 | 107 |
| PS375.10 | 10 | 133 | |
| PS375.12 | 12 | 160 | |
| 400 | PS400.08 | 8 | 120 |
| PS400.10 | 10 | 150 | |
| PS400.12 | 12 | 180 | |
| 450 | PS450.08 | 8 | 153 |
| PS450.10 | 10 | 192 | |
| PS450.12 | 12 | 230 | |
| 500 | PS500.08 | 8 | 186 |
| PS500.10 | 10 | 233 | |
| PS500.12 | 12 | 280 |
