MDPE 12.5 Bar
Medium Density Polyethylene Pressure Pipe is an internationally proven pipe system, ideally suited to farm reticulation systems where LDPE pressure limitations are exceeded.
Available in coils with diameters 16 to 140mm and pressures 6.3 to 25 bar.
Standard coil sizes available: 50, 100 and 200m rolls.
Other diameters are pressure ratings also available in straight lengths. Suitable for drinking water and in-line bloat applications.
Proudly made in New Zealand by RD Manufacturing
Fittings
All Rural Direct Branches sell a full range of Philmac compression fittings and AGRU electro-fusion fittings to suit MDPE Pressure Pipe.
| MDPE PN12-5 OD Dimensions | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nominal OD | Outside Diameter | Wall Thickness | Average Inside Diameter | Pressure Rating (at 20°C) | ||||||||
| Min. | Max. | Min. | Max. | |||||||||
| mm | mm | mm | mm | mm | Bar | PSI | ||||||
| 25 | 25.0 | 25.3 | 1.9 | 2.2 | 21.1 | 12.5 | 181 | |||||
| 32 | 32.0 | 32.3 | 2.4 | 2.8 | 27.0 | 12.5 | 181 | |||||
| 40 | 40.0 | 40.4 | 3.0 | 3.4 | 33.8 | 12.5 | 181 | |||||
| 50 | 50.0 | 50.5 | 3.7 | 4.2 | 42.4 | 12.5 | 181 | |||||
| 63 | 63.0 | 63.6 | 4.7 | 5.3 | 53.3 | 12.5 | 181 | |||||
| 75 | 75.0 | 75.7 | 5.5 | 6.2 | 63.7 | 12.5 | 181 | |||||
| 90 | 90.0 | 90.9 | 6.6 | 7.4 | 76.5 | 12.5 | 181 | |||||
| 110 | 110.0 | 111 | 8.1 | 9.1 | 93.3 | 12.5 | 181 | |||||
| 125 | 125.0 | 126.2 | 9.2 | 10.3 | 106.1 | 12.5 | 181 | |||||
| MDPE 12.5 Bar Pressure Pipe | ||||||
|---|---|---|---|---|---|---|
| Rural Pressure OD Pipe PN12 PE100 – Black Pipe Blue Stripe | ||||||
| DN (OD) mm | Product Code | Coil Length in m | Pressure Rating | |||
| 25 | MD25.PN12.025 | 25 | PN12.5 | |||
| MD25.PN12.050 | 50 | |||||
| MD25.PN12.100 | 100 | |||||
| MD25.PN12.200 | 200 | |||||
| 32 | MD32.PN12.050 | 50 | PN12.5 | |||
| MD32.PN12.100 | 100 | |||||
| MD32.PN12.200 | 200 | |||||
| 40 | MD40.PN12.050 | 50 | PN12.5 | |||
| MD40.PN12.100 | 100 | |||||
| MD40.PN12.200 | 200 | |||||
| 50 | MD50.PN12.050 | 50 | PN12.5 | |||
| MD50.PN12.100 | 100 | |||||
| MD50.PN12.200 | 200 | |||||
| 63 | MD63.PN12.050 | 50 | PN12.5 | |||
| MD63.PN12.100 | 100 | |||||
| MD63.PN12.200 | 200 | |||||
| 75 | MD75.PN12.050 | 50 | PN12.5 | |||
| MD75.PN12.100 | 100 | |||||
| 90 | MD90.PN12.050 | 50 | PN12.5 | |||
| MD90.PN12.100 | 100 | |||||
| 110 | MD110.PN12.050 | 50 | PN12.5 | |||
| MD110.PN12.100 | 100 | |||||
